The dam collapse
at Vale’s (NYSE: VALE) Córrego do Feijão mining complex in Brazil, which killed almost 300 people two years ago, could have been foreseen with the right monitoring technology.
This is according to a recent study
by researchers at the University of Nottingham and Durham University, who collaborated with Terra Motion and discovered that by applying satellite radar imaging InSAR to check for small ground movements in and around dams, it is possible to predict a dam burst
“Our ISBAS InSAR results revealed that different areas of the dam were moving at different rates and some of these were seen to accelerate suddenly during the two months preceding the collapse,” Stephen Grebby, lead author of the study, said in a media statement. “Despite the dam being monitored by the mining company using standard techniques with no apparent warning raised, our analyses of the precursory movement indicate the timing of the collapse was foreseeable.”
The top left and the bottom right images are satellite shots of the Brumadinho tailings dam taken before and after the collapse on 25 January 2019. The top right and bottom left show precursory movement across the dam (red and yellow colours), which the researchers analyzed to find that the collapse could have been predicted. (Image courtesy of the University of Nottingham).
Grebby explained that ISBAS stands for Intermittent Small Baseline Subset, which is an advanced InSAR technique that can help overcome the limitations faced when using some of the more conventional InSAR techniques over vegetated terrain.
According to the researcher, another benefit of this technology over the commonly used on-the-ground sensors is that it looks down from above and offers a more complete picture of ground movements with millimetre-level accuracy.
See what score you get for your TSF monitoring program here
In fact, for him and his team, identifying an acceleration of ground movements during a period of wetting, just prior to the failure, helped to corroborate the anticipated failure mechanism.
In the cases studied, thus, the collapse of the tailings dam
could be explained by a reduction in suction in the tailings contributing to internal strains that could induce static liquefaction in the brittle materials.
Could have been predicted
“If monitored routinely, using the ISBAS InSAR technique, the failure date could have been predicted. Crucially, this prediction would have been possible around 40 days prior to the collapse, allowing time for a warning to be raised that the dam was becoming unstable,” Grebby said. “This could have led to more in-depth monitoring or other mitigation measures to avert the loss of life and environmental disaster that tragically unfolded.”
Learn about Decipher’s InSAR module
On January 25, 2019, the tailings dam at Córrego do Feijão iron ore operation near the town of Brumadinho collapsed and released a river of sludge that covered nearby buildings, killed 270 people and forced the evacuation of hundreds of locals.
The accident happened in the same state – Minas Gerais – of the Samarco
dam failure, which killed 19 people in 2015.
To avoid more losses of human lives and push mining companies to improve their dam monitoring techniques, the British researchers are now looking to develop the technology they studied as software so that industry can have access to it.
In Grebby’s view, if combined with on-the-ground sensors, the advanced InSAR techniques can be a valuable addition to the monitoring toolbox to evacuate and protect life.
Published by Mining.com
Effectively monitor your tailings storage facility with Decipher
Decipher’s Tailings solution
is designed to provide you with key data and insights, enabling you to effectively monitor your TSF and your environmental obligations and compliance. Our solution can be securely accessed by industry, regulators, designers and operators involved in the management of TSFs.
Decipher offers a comprehensive and functionally rich solution which combines regulatory (Compliance Management Software), mining waste management, stakeholder engagement, environmental monitoring, and environmental management system (EMS) tools to assist with tailings management:
- View real-time data and receive exceedance alerts
- Monitor land movement with remote sensing and InSAR datasets
- Visualise real-time LiDAR data with insights into dam movement
- Securely store and access all of your tailings data in the one place
- Upload and reference key documentation
- Visualise facilities across multiple sites in a single screen on a geospatial map
- Monitor your facilities with InSAR, LiDAR, DEM and more
- Capture a wide range of monitoring data and indicators su
ch as surface and groundwater, decant pond water levels and quality, and embankment conditions
- Capture and track obligations and conditions around your licence to operate to manage your key risks and actions
- Action and task delegation for data collection with reminders
- Maintain and track environmental monitoring compliance limits and exceedances
- Manage and engage with all of your stakeholders with one central repository
- Convert your engagements into actionable outcomes
- Forecast, plan and track your sites activities using IBM’s Weather data
- Create corporate report templates and meet requests for data provision from industry groups such as ICMM, Global Tailings Portal, PRI and UNEP
- Integration capability with third party systems or public portals such as the Global Tailings Portal
Request a demo
Don’t miss another update!